Home | Download | Discussion | Help | Site Map | New Posts | Sign in

Latest Site News

New Creator Theme: Elders! - posted on 1st Sep 2018 at 11:43 AM
Replies: 4 (Who?), Viewed: 3469 times.
Needs Coffee
staff: moderator
Original Poster
#1 Old 27th Dec 2017 at 5:01 AM Last edited by joandsarah77 : 27th Dec 2017 at 9:37 PM.
Default Grid adjuster leaving a gap (solved)
I am trying to make a 2 click foundation with Grid Adjuster. That part works fine, but the issue is the gap on the third level. The other levels are fine. Moving the windows out and back does not change this. Will CFE fix this or is there something more in Grid Adjuster that I need to do?
Screenshots

"I dream of a better tomorrow, where chickens can cross the road and not be questioned about their motives." - Unknown
~Call me Jo~
Advertisement
No, it doesn't blink.
retired moderator
#2 Old 27th Dec 2017 at 9:48 AM
The room height on that level looks wrong. I think that's what is causing the gap. Maybe you could use CFE to adjust it?

I will choose a path that's clear- I will choose free will -RUSH
Yearbook
***Sims File Share- ask me for a code***
Simpeople and Me Archive- -11Dots Archive- My Sims World Archive
If you are looking for files from old websites, the Internet Archive is your best friend.
Needs Coffee
staff: moderator
Original Poster
#3 Old 27th Dec 2017 at 10:05 AM Last edited by joandsarah77 : 27th Dec 2017 at 12:28 PM.
It's too tall. I was thinking about using CFE on it but didn't want to do that in case it was the wrong thing to do. I guess I could always place a copy into the bin first so I have a backup.

Edit: That seems to have fixed it. I tried CFE on the first lot (I had to resort to a backup) and had wonky things happen to the ground, but I am putting that down to the fact that I had used CFE on that lot before using grid adjuster and it hadn't played nicely together.

"I dream of a better tomorrow, where chickens can cross the road and not be questioned about their motives." - Unknown
~Call me Jo~
The Great AntiJen
staff: moderator
#4 Old 27th Dec 2017 at 2:08 PM
When you use Grid Adjuster, you have to adjust all the levels above the foundation (as I recall it), otherwise the wall heights are wrong. I'd better check.

tflc is my tumblr with uploads not uploaded here: https://www.tumblr.com/blog/tflc

Polgannon: Who Murdered Blaise Penhaligan?
(3rd ed. neighbourhood now available with corrections). Poll: http://strawpoll.me/6689876

Thread for yakking about making TS2 stuff
Needs Coffee
staff: moderator
Original Poster
#5 Old 27th Dec 2017 at 9:37 PM
It was only the one level which had grown by two clicks. I redid the grid adjuster and CFE on the copy in the bin and that fixed things. I must have done something to the original by doing some CFE before using the grid adjuster because it would not fix. If the building looked good it had a crater in the ground and if I smoothed the crater the building was wonky.

I think normally it would be, change with the Grid Adjuster then use CFE to adjust the walls. I guess if your building is only one level like in the tutorial it wouldn't need that second step.

"I dream of a better tomorrow, where chickens can cross the road and not be questioned about their motives." - Unknown
~Call me Jo~
Back to top